38 mm reproduction cylinder kit for Puch Supermaxi LG1 / LG2 mopeds. This cylinder also fits Puch Maxi or Puch X30 mopeds, as it is equipped with smaller exhaust ports. In this case, however, the corresponding exhaust with a narrower outlet must be fitted.
The tuning cylinder has a larger inlet and outlet. Therefore, the cylinder has slightly more intake than the original counterpart.
The piston has two piston rings.
You can find suitable add-on parts in the accessories section.
Attention: The stud bolt distance on the intake side is only 32 mm. On the original cylinder, this is 38 mm. The holes on the intake manifold must therefore be widened slightly in order to be able to fit it.
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Nominal diameter | 38 mm |
| Area of application | Tuning |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 12 mm |
| Hole spacing inlet | 32 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing outlet | 42 mm |
| Hole pattern [mm] | 44 x 44 |
| Outlet type | slanted |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Camouflaged | No |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Area of application: Standard · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
CHF 7.40
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Width: 14.2 mm · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Tomos OEM number: 035548 · Alternative version of the Sachs OEM number: 0232 157 001
CHF 11.90
Moped fans also bought
GPO license plate holder Inox (CH version)
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Height: 5.3 mm · Total length: 145 mm · Color: silver · Thread type: M5x0.8 (standard thread) · Ø mounting hole: 5 mm · Width: 105 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Thread length: 8 mm
CHF 10.90
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Color: silver · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
CHF 8.80
swiing® revival clamping screw M5x20 Bing carburetor
Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Material: Steel · Area of application: Original · Color: silver · Total length: 24.1 mm · Screw head: Hexagon · Ø shaft: 3.8 mm · Thread type: M5x0.8 (standard thread) · Shank: Yes · Shank length: 11.5 mm · Drive: External hexagon · Drive: Slot · Width across flats SW: 8 mm · Thread length: 8.5 mm · Pony OEM number: A4593 · Sachs OEM no.: 0962 066 000
CHF 2.90
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Number of teeth: 40 pcs · Ø inside: 94 mm · Color: black · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 106 mm · Number of fixing points: 6 pcs
CHF 19.90
Collection only possible with online purchase and appointment.
