Shaft seal ring with sealing lip made of PTFE (Teflon) with the dimensions 15/24/5 mm (15x24x5) for use on the crankshaft of your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
This radial shaft seal with fluorine rubber outer jacket is resistant up to a temperature of 200°C, whereas conventional NBR oil seals are only resistant up to 100°C.
This radial sealing ring (also known as an FKM Simmerring or Viton) has an additional sealing lip made of PTFE, a thermally highly resilient material that does not interact with the lubricant and can therefore withstand the highest loads.
You can find more sealing rings for your Piaggio in the accessories section.
Quality product from the Italian manufacturer Polini.
The set includes the following fixed parts:
Details
Temperature resistance (min.) | -30 - 200 °C |
Simmering type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
Manufacturer | Polini |
Ø inside | 15 mm |
Ø outside | 24 mm |
Area of application | Racing |
Material | Viton |
Surface | rubberized |
Width | 5 mm |
Place of use | Crankshaft |
Suitable for the following models
Piaggio | Ciao - Ciao, Ciao, Ciao, Ciao Si Bravo/Superbravo Boxer Grillo |
Accessories & related products
Malossi oil seal FKM/PTFE 15/24/5 A crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 200 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Malossi · Material: Viton · Surface: rubberized · Place of use: Crankshaft · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm
CHF 14.30
Oil seal FPM 15/24/5 AS crankshaft original | Piaggio Ciao, SI, Bravo & Boxer
Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Piaggio · Material: FPM - Rubber · Surface: rubberized · Place of use: Crankshaft · Ø inside: 15 mm · Temperature resistance (min.): -30 - 200 °C · Ø outside: 24 mm · Width: 5 mm
CHF 9.10
Moped fans like you also bought:
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Surface: blue galvanized · Tension: 12 V · Width: 27 mm · Performance: 100 W · Type of current: Alternating current (AC) · Height: 15 mm · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
CHF 34.90
swiing nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing · Material: Brass · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA (type 3) · Carburetor type: SHA (type 4) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
CHF 20.90
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: blue galvanized · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Diameter: 12 mm · Diameter: 24 mm · Total length: 100 mm · Number of components: 2 pcs
CHF 17.90
SKF 6202 C3 ball bearing 15/35/11
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6202 · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Bearing type: Deep groove ball bearing · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm · Puch spare part no.: 900.4.6202
CHF 9.90
Polini radial shaft seal FKM/PTFE 15/24/5
Temperature resistance (min.): -30 - 200 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Manufacturer: Polini · Material: Viton · Surface: rubberized · Area of application: Racing · Place of use: Universal · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm
CHF 14.50
Not in stock